Increase video volume online, free

Make a quiet video louder without distortion. Pick the gain or a target loudness, and the picture is copied untouched. Nothing is uploaded.

  • Free
  • No watermark
  • No sign-up
  • Stays on your device

Measuring the current loudness…

How to change the volume

Working…

0%

✓ Done

Before
After
Download

🔒 Your file stays on this device. Nothing is uploaded.

A video can be too quiet for many reasons: a phone microphone far from the speaker, a screen recording with a low system volume, or a clip exported at a safe but timid level. Turning the player volume up does not fix the file, because the next person who watches it hits the same problem. Raising the volume in the file itself does.

There are two ways to do it here. The first is plain gain: add a number of decibels. Each +6 dB doubles the signal level, and about +10 dB sounds twice as loud. The second is loudness matching: the tool measures the integrated loudness of your video in LUFS (the same measure that YouTube, Spotify and broadcasters use) and moves it to the target you pick. That is the better choice when you want several clips to sound equally loud next to each other.

The risk with any boost is clipping, where peaks above the digital maximum are chopped off and sound harsh. The limiter prevents that by holding peaks at -1 dBFS with a quick, smooth gain reduction. The sound is then encoded again (AAC for MP4 and MOV, Opus for WebM), and the video stream is copied, so the picture is not touched.

How to use it

  1. Add your video

    Drag a file onto the box or tap Choose video. The tool measures how loud it is right away, which takes a few seconds even for long clips.

  2. Choose the gain

    Set the decibels yourself with the slider, or switch to target loudness and let the tool work out the gain. Keep the limiter on.

  3. Press Make it louder and download

    Only the sound is processed. The picture is copied into the new file, so there is no loss and little waiting.

Why use Clipalio

No clipping

A look-ahead limiter lowers the gain a few milliseconds before a loud peak, so speech and music stay clean even after a big boost.

Real loudness numbers

We show LUFS, the unit streaming services use, and not just a percentage, so you can match -14 or -16 on purpose.

Picture untouched

The video stream is copied, not re-encoded. Only the audio track is rebuilt, which keeps the file fast to make and sharp to watch.

Private and free

Everything runs in your browser. No upload, no account, no watermark.

Frequently asked questions

How many dB should I add?

For a quiet voice recording, +6 to +12 dB is usually enough. The tool shows the current loudness; aim for about -16 LUFS for speech. Above +20 dB you start to lift noise as much as the voice.

What is LUFS?

It is a loudness measure that follows how people hear, used by YouTube, Spotify and TV. A video at -14 LUFS sounds about as loud as typical streaming content. Lower numbers like -30 are quieter.

Will the sound distort?

Not with the limiter on: it holds peaks at -1 dBFS. Without it, loud parts may clip, and the result page tells you how many samples did.

Does the video quality change?

No. Only the audio track is re-encoded. The picture is copied byte for byte into the new file.

Can I make a video quieter?

Yes. Drag the gain below zero, or choose a lower target loudness. The same limits for file size and formats apply.

Is my video uploaded?

No. The audio is decoded, changed and encoded in your browser tab. The file never leaves your device.

Honest limits

  • It changes the volume of the whole video; it cannot boost only one part.
  • It cannot separate voice from noise: a boost raises everything. For noisy recordings, remove the noise first.
  • The sound is re-encoded once (AAC or Opus at 192 kbps), which is inaudible for most content but is not a bit-exact copy.
  • The result is built in memory, so very large files may fail on phones.